service line:400-680-8962 +86-13953623913
product performance and application
This product is made of a variety of esters, enzyme, dispersing agent, stabilizing agent and penetrating agent according to certain proportion of compound enzyme products, suitable for using secondary fiber pulp as raw material of paper mill, mainly by the larger adhesive material is decomposed into small adhesive material, which can be used with other additives to achieve the purpose of removing sticky powder.
Mechanism of action
Most adhesives contain a large number of ester bonds, which connect the basic structure of adhesives together, and esterase can break and destroy these ester bonds to reduce their viscosity and make it difficult to repolymerize in the system, which achieves the purpose of degradation, anti-coagulation and anti-deposition.
Product features
Appearance: colorless to light yellow liquid solubility: soluble in water
PH value: 3.0-7.0 density: 1.0-1.3g/cm3
Conditions of use
Enzyme dosage: 100-500ml/t
PH value: 5.0-9.0 suitable temperature: 25-70ºC
Add point: discharge tank after pulp crushing, coarse screen, storage tank (or after the thick riser), paper machine before copying pool, etc., the specific add point according to the actual process flow to determine.
Source and harm of adhesive
In the process of waste paper treatment, the adhesive is very difficult to control due to its large viscosity, light weight, non-hydrophilic and wide melting point range, and it is easy to adhere to other substances and form co-precipitation.
Residual adhesive particles are prone to produce various hazards in the copying process
6.1. Deposit on the forming network, block the mesh, cause water filtration difficulty, increase the cleaning time
6.2. Deposit on the pressed wool cloth and press roll, shorten the service life of wool cloth, and affect the water filtration of paper pages
6.3. Adhere to the surface of the drying cylinder, resulting in broken paper
6.4. residue in a page, forming a smudge and increasing paper sickness
6.5.gathered in the water, be "anionic trash", affect the effects of cationic additives
Matters needing attention
the specific dosage of this product is determined by paste composition, treatment temperature, pH value and action time
the residual oxidising chemicals in the operating environment should be kept as low as possible to prevent enzyme inactivation
avoid unnecessary contact with products. Wash hands with water after use
Storage and packaging
Sealed storage in a cool and dry place, storage at 5-20ºC for six months activity will not reduce by 10%;
Products should not be frozen.
The standard packing is 20 kg/drum, the specific packing can be decided according to user's requirement.
back to the top